When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
thanks mate for that this is what they say
"There are two taps, one is gray, one is blue. These need to be tapped into the stock headlamp wiring on the driver side. The brown wire runs to the negative (-) terminal on the battery, and the black wire with the fuse runs to the positive (+) terminal"
only difference is mines brown and red as opposed to gray and blue but hope it works
Is one of them spliced into the + battery wire in your picture ?? If it is its a live feed for the relay on the other side which would make the other wire a power feed for high beam.
Is one of them spliced into the + battery wire in your picture ?? If it is its a live feed for the relay on the other side which would make the other wire a power feed for high beam.
i thought it was splice from the bty live feed but it appears to come from another part of the plug
this might be better
i have them on the car at the mo but i couldnt figure out where the wires go, i.e which part of the plug or pin does the red wire go and which colour is the main beam live on the other light
Last edited by sedge69; 26 August 2011 at 11:10 AM.