hi guys

how do i adjust the headlights for height as beam pattern is low on 1 side and high on the other side

cheers

 

Hex shaped adjusters on top of electrical adjusters. Try it in front of a wall so you can see which way to turn it for up.

 

agree with above post, but turn screw slowly at first.. it's quite easy to run the adjuster off the end of the screw, and it's really tricky to get it back on!!
(I know.. I did it!!)
just check the adjuster motors are working, as this might be your problem.. car about 20 ft from a wall, headlights on and move the heifgt adjuster **** on the dasj.
both lights should move up and down together... (won't if the screw is 0ff!!)