Speedo wiring help
Hi everyone. Can anyone help me to find speedo wiring for '98 classic? Its electronic speedo with connectors on back of clocks and I want to fit '99 facelift dials with green connectors on top. I have wiring diagram of those '99 dials but cant find those earlier. Or maybe someone knows how to change plugs in loom?
I've got old dials loom:

and new dials loom:

but main plugs seems to be different. So if anyone got any ideas how to modify them I will thank you from the bottom of my heart
Any help would be appreciated.
Cheers, Cypek
I've got old dials loom:

and new dials loom:

but main plugs seems to be different. So if anyone got any ideas how to modify them I will thank you from the bottom of my heart
Any help would be appreciated.Cheers, Cypek
Hi Cypek,
Ive got pin outs for a 98sti speedo but not a 98uk version. Is it not possible to trace the copper ribbon on the back of the new speedo identifying each section & swap the wires accordingly.
I remember reading (google for hours) that the 99 uses a 3 wire type speedo sensor so that may cause you problems as the 98 is 2 wire type. This was prior to my dash conversion.
Is it a sti 99 speedo clock or uk version & why so you want to use a 99 speedo instead of a 98.
Ticky
Ive got pin outs for a 98sti speedo but not a 98uk version. Is it not possible to trace the copper ribbon on the back of the new speedo identifying each section & swap the wires accordingly.
I remember reading (google for hours) that the 99 uses a 3 wire type speedo sensor so that may cause you problems as the 98 is 2 wire type. This was prior to my dash conversion.
Is it a sti 99 speedo clock or uk version & why so you want to use a 99 speedo instead of a 98.
Ticky
I've just bought speedo from '99 UK turbo as I own '98 Impreza Sport and I wanted to have white dials, other thing is my speedo needles are sticking (previous owner was messing with it) and when I smack it from top
it starts working again. Now I have speedo but cant connect it and I dont want to buy another one. My friend is qualified electrician and he can help me reconnect wires I just cant find wiring diagram this older electronic speedo (newer one is here: Impreza Manuals )OK
If anyone knows if its possible or how to do it please let me know.
Cheers, Cypek
it starts working again. Now I have speedo but cant connect it and I dont want to buy another one. My friend is qualified electrician and he can help me reconnect wires I just cant find wiring diagram this older electronic speedo (newer one is here: Impreza Manuals )OK
If anyone knows if its possible or how to do it please let me know.Cheers, Cypek
Chris Palmer's Home Page
There is a 97-98 pdf you can download.
Thanks for the link as well. I use to have the same link but under a different web address which does not work. I can now download the rest off the stuff I need before that goes too.
Like I said before double check the wires via the ribbon circuit at the back.
Using you old clock as a guide.
Ticky
There is a 97-98 pdf you can download.
Thanks for the link as well. I use to have the same link but under a different web address which does not work. I can now download the rest off the stuff I need before that goes too.
Like I said before double check the wires via the ribbon circuit at the back.
Using you old clock as a guide.
Ticky
Thanks for this link. I downloaded wiring diagram but it looks different than mine
In my clocks there are 3 plugs at the back and in this diagram there are only 2 plugs
I'm getting more and more confused now
Thats my speedo with plugs:

Thats newer type with plugs on top:

On this wiring it seems there are 2 large plugs on each side and small plug in the middle. Don't know what to think
In my clocks there are 3 plugs at the back and in this diagram there are only 2 plugs
I'm getting more and more confused now
Thats my speedo with plugs:

Thats newer type with plugs on top:

On this wiring it seems there are 2 large plugs on each side and small plug in the middle. Don't know what to think
JDM V4 Harness: This is what the connector leads to on the gauge cluster
A1> BlU/WHT high beam indicator
A2> RED high beam indicator
A3> YEL door open, interior lights
A4> LTGRN ! symbol for parking brake
A5> RED/WHT CEL (now in red)
A6> BLK/WHT battery symbol/light
A7> BLK/BLU seat belt symbol/light
A8> GRN/WHT oil drip symbol/light
A9> BLU/RED open door warning/light
A10> WHT vehicle speed sensor 2
A11> GRN/BLK vehicle speed signal wire
A12> BLK vehicle speed sensor 2
A13> VIO illumination
B1> YEL/BLK clock
B2> GRN/WHT temp gauge
B3> BLK/RED temp gauge
B4> BLK ground
B5> -------
B6> BLK/GRN left turn indicator
B7> GRN/RED airbag symbol/light
B8> BLU/ORG open door warning indicator/light
B9> LTGRN/BLK right turn indicator
B10> GRN tach signal
C1> ORG/WHT illumination
C2> BRN/WHT fuel gauge
C3> RED/BLK low fuel warning light
C4> YEL/GRN hot "thing" warning light
C5> LTGRN/YEL ABS indicator/light
C6> BLU/YEL snow flake "HOLD" warning/indicator
C7> PNK ???
C8> WHT/BLK small lightbulb housing, with no transparent indicator
C9> YEL/RED I/C Spray indicator light
C10> BRN/RED small lightbulb housing, with no transparent indicator
C11> ------ small lightbulb housing, with no transparent indicator
C12> WHT/GRN temp gauge
C13> YEL/GRN clock
Just note this is for a 98sti speedo.
I know its not excatly what you want but at least some of the wire colour codes should match.
The original thread is on RS25.com, you will need to register & search via that forum for 98sti speedo conversion. The rs version speedo is similar to the uk. I just kept notes on the jdm.
Ticky
A1> BlU/WHT high beam indicator
A2> RED high beam indicator
A3> YEL door open, interior lights
A4> LTGRN ! symbol for parking brake
A5> RED/WHT CEL (now in red)
A6> BLK/WHT battery symbol/light
A7> BLK/BLU seat belt symbol/light
A8> GRN/WHT oil drip symbol/light
A9> BLU/RED open door warning/light
A10> WHT vehicle speed sensor 2
A11> GRN/BLK vehicle speed signal wire
A12> BLK vehicle speed sensor 2
A13> VIO illumination
B1> YEL/BLK clock
B2> GRN/WHT temp gauge
B3> BLK/RED temp gauge
B4> BLK ground
B5> -------
B6> BLK/GRN left turn indicator
B7> GRN/RED airbag symbol/light
B8> BLU/ORG open door warning indicator/light
B9> LTGRN/BLK right turn indicator
B10> GRN tach signal
C1> ORG/WHT illumination
C2> BRN/WHT fuel gauge
C3> RED/BLK low fuel warning light
C4> YEL/GRN hot "thing" warning light
C5> LTGRN/YEL ABS indicator/light
C6> BLU/YEL snow flake "HOLD" warning/indicator
C7> PNK ???
C8> WHT/BLK small lightbulb housing, with no transparent indicator
C9> YEL/RED I/C Spray indicator light
C10> BRN/RED small lightbulb housing, with no transparent indicator
C11> ------ small lightbulb housing, with no transparent indicator
C12> WHT/GRN temp gauge
C13> YEL/GRN clock
Just note this is for a 98sti speedo.
I know its not excatly what you want but at least some of the wire colour codes should match.
The original thread is on RS25.com, you will need to register & search via that forum for 98sti speedo conversion. The rs version speedo is similar to the uk. I just kept notes on the jdm.
Ticky
Thanks very much. Now I have to call my friend electrician
I'll post my result in couple of days I think (if I won't just sell them
) but I have some hope at the moment
Thanks again
I'll post my result in couple of days I think (if I won't just sell them
) but I have some hope at the moment
Thanks againThread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM




