Heater problems
24 March 2007, 02:34 PM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2007
Location: Norwich
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Heater problems
Hi, 96 classic. The heater is always hot apart from the last cold position, what could be wrong?
Also seems to take a while to heat up!
Thanks in advance.
Also seems to take a while to heat up!
Thanks in advance.
12 April 2007, 06:55 PM
#4
Scooby Senior
Join Date: Feb 2003
Location: West Midlands
Posts: 1,903
Likes: 0
Received 0 Likes
on
0 Posts
There is a temp sensor but that only works on auto function.
The heat control **** works via a servo opening & closing a flap which is part of the heater control unit.
You can just about see the both servos on the side of the heater unit.
Centre console/ foot wells.
There should be a metal rod which connects to the servo & flap, make sure nothing is obstructing its movement. Or check if the rod is not connected.
Operate the heater dial whilst looking at the servo, you should hear it working.
Ticky
The heat control **** works via a servo opening & closing a flap which is part of the heater control unit.
You can just about see the both servos on the side of the heater unit.
Centre console/ foot wells.
There should be a metal rod which connects to the servo & flap, make sure nothing is obstructing its movement. Or check if the rod is not connected.
Operate the heater dial whilst looking at the servo, you should hear it working.
Ticky
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM