Defi Problem
04 October 2006, 05:47 PM
#1
Scooby Regular
Thread Starter
Join Date: Sep 2004
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
Defi Problem
Just left work got in the car, and drove off, looked at my gauges, and they not working, they all are off the zero, but not working. the power is ok, because the lights etc, on the controller are still on, but the buttons on this are having no effect??
any one got any ideas, they have been wokring fine since fitting over 2 weeks ago
any one got any ideas, they have been wokring fine since fitting over 2 weeks ago
04 October 2006, 07:27 PM
#2
Sounds like the erath connection has gone US.
Mine did it about 12 months back. I've now run them back straight to battery -ve.
If it's not that, e-mail Defi in Japan, you'll get a reply in English with instructions on how to fault find your particular fault.
Alcazar
Mine did it about 12 months back. I've now run them back straight to battery -ve.
If it's not that, e-mail Defi in Japan, you'll get a reply in English with instructions on how to fault find your particular fault.
Alcazar
05 October 2006, 09:12 AM
#4
Mine had been on TWO YEARS 
when the earth just fell off
Vibration under dash, I suspect
It's what I'd check first, followed by:
**Do they still have both permanent and switched live? (to the control box).
**Has one of the daisy chain leads come unplugged, loose, or a wire fallen off one of the connectors ? (One of mine needed a new connector when it was delivered).
Alcazar
when the earth just fell off Vibration under dash, I suspectIt's what I'd check first, followed by:
**Do they still have both permanent and switched live? (to the control box).
**Has one of the daisy chain leads come unplugged, loose, or a wire fallen off one of the connectors ? (One of mine needed a new connector when it was delivered).
Alcazar
Last edited by alcazar; 05 October 2006 at 09:16 AM.
Thread
Thread Starter
Forum
Replies
Last Post