Harvez

This is driving me crazy now !!

When i brought the car the prevous owner had motor bike indercators but they wasnt correct as they would always flash fast . . .

Anyways got a new bumper and ditched the old indacators for some correct crystal ones, simple job right just plug in and play. NO

Now they do not work at all and i cant get my head over whats causing the problem, ive taking them off, checked new bulbs, re-connected, checked fuse's, re-checked fuses but still nothing

Ive run out of ideas what else could be causing them to not work? Because the front ones dont even flash at all now and i dont want any more fines from the police because of somethin so simple.

Forgot to mention its for a 1995 WRX (import), in my fuse box there are three fuse's missing completly - can anyone send me to a link to what fuse is what cause i havent learn japanese just yet

Hpe someone can help before i lose any more hair

Harvez

You all suck :P

Allan

iTrader: (1)

Can't help you with specific fuse box information for a 95 WRX.

However, you could try working through the system with a meter to determine where you have power and where you don't.

If you don't have a meter, use a bulb and a couple of bits of wire.
Also try seaching for wiring diagrams, that might give you some idea of what should be in place.

Allan

Harvez

Hello mate

Just looked on the fuse box cover properly, as last time i saw it i disregarded it straight away because it was in jap. But the three missing fuses are normal according to the casing so thats not a problem

I think a mates got a tester ill borrow that at the weekend and hopefully can source the problem

alcazar

iTrader: (2)

I reckon it'll turn out that you have power, but no earth, something to do with the new bumper?

Alcazar

Fuzz

Have you checked the flasher relay?

Andy

richiewong

Believe it or not but a good squirt of WD40 got mine working on my old car when I swapped for crystals.