Scotsman

iTrader: (3)

Looks like the relays on my alarm are playing up as the indicators sometimes stick on when setting or disarming the alarm. I'm not that fussy about having them flash as I always check the doors after setting them anyway.

Is it possible/easy to disable the indicator flashing?

Cheers
Richard.

ryn004

You can remove the fuse of the alarm. But that will disable the auto door locks as well.

Scotsman

iTrader: (3)

Thanks Ryn. I might try and give a local Scooby garage a call and see if there's a way I can do it without disabling the auto-door locking (or the alarm function itself).

Sigma Sam

Although the indicator flash cannot be turned off by programming, it is possible to disable the indicators by cutting the indicator supply wire (your dealer should know the location of this wire), however be warned that the indicators will not flash when the alarm is triggered either.
SS

nas sti

take off the cowling around the steering wheel , the indicator feeds should be wired to the switch 2 wires the same colour . forgot the colour its been that long since i 've fitted sigmas . chop these 2 wires and tape them up job done

Scotsman

iTrader: (3)

Thanks guys