How do i get my alarm to chirp (part 2!)
27 August 2004, 09:27 AM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2004
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
How do i get my alarm to chirp (part 2!)
I have the same question as messiah, but mine is a Laserline system. It used to chirp but i did something accidentally and now it doesn't.
Any ideas anyone?
Any ideas anyone?
27 August 2004, 02:13 PM
#2
Scooby Regular
Join Date: Jul 2003
Location: Surviving as a soldier of fortune on the Los Angeles underground...
Posts: 7,181
Likes: 0
Received 0 Likes
on
0 Posts
Maybe the budgie inside the box has died... 
What about trying Laserline's website for a downloadable manual?
What about trying Laserline's website for a downloadable manual?
28 August 2004, 10:57 AM
#3
Scooby Newbie
Join Date: Aug 2004
Location: Wirral
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
If it is a Laserline 996 try
1. Disarm the alarm
2. Turn on the ignition
3. Open the drivers door then press the arm button and look at led for following conformation....
enabled= The LED will flash once accompanied by a short beep from siren
disabled= The LED will flash twice without a siren beep
4. Turn off vehicle ignition, close all doors and arm in the usual way.
Hope that helps
Dave
1. Disarm the alarm
2. Turn on the ignition
3. Open the drivers door then press the arm button and look at led for following conformation....
enabled= The LED will flash once accompanied by a short beep from siren
disabled= The LED will flash twice without a siren beep
4. Turn off vehicle ignition, close all doors and arm in the usual way.
Hope that helps
Dave
28 August 2004, 12:43 PM
#4
Scooby Regular
Thread Starter
Join Date: Aug 2004
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Woohoo! cheers retroR2 it worked. It is a laserline 996.
Do you happen to have a copy of the instructions? If so, does it say anything about remote central locking because i still need to use the key to lock mine.
Do you happen to have a copy of the instructions? If so, does it say anything about remote central locking because i still need to use the key to lock mine.
28 August 2004, 12:58 PM
#5
Scooby Newbie
Join Date: Aug 2004
Location: Wirral
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I have the instructions i have one fitted to mine and I have to use the key to unlock/lock mine too. For remote locking it looks like you need an optional interface though I have no idea which one as the instructions dont really mention it.... May need to contact a Laserline dealer to find out.
Dave
Dave
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
toyney83
General Technical
10
02 October 2015 08:38 PM