Hi All
I am putting a v3 STi back together and nearly there but it won't fire. Initial investigation shows the fuel pump isn't running. I have checked the black connector under the rear seat and it is clean but no power to it. I bought the car as a project so not too sure about what relays if any have been removed. When I turn on the ignition I hear a click behind the passenger side glove box which is the relay clicking so that appears ok. I have had a look under the drivers side kick panel and there is a green connector 4 pins not connected. and ideas.

 

any immobiliser fitted ?

 

Now sorted. The previous guy must have removed the pump relay and bridged the terminals inorder to pump the tank dry and didn't replace the relay. What a stupid place to put such an important relay. The engine last ran August 2016 but sounded sweet - a credit to Subaru.

 

Glad you sorted it, it's a pig to get to isn't it, I believe the relay for the heater fan is the same if you're after a temporary replacement, I found ICP the cheapest place when mine failed.