aza

I have trawled the web looking for an easy way to get a power lead through the bulkhead of my MY impreza wagon. Does anyone know the easiest way through or if there are any guides threads on how to do this.

I have tried standing on my head taking the glove box apart and some of the air-con. I have found a spare fuel line nipple and poked the power cable through there but I will be damned if I can find the other end when I poke it through.

any ideas please?

wongy

most people use the gromet on the bulkhead from the engine side should be near the brake fluid botte goes through to under neath the steering

hope this helps

my06 ppp silver

iTrader: (2)

yup, i did this, although mine on a hawk is passenger side. pull the gromet out of the hole, puncture and tear a very small piece from puncture hole, push lead through then re-fit gromet. very tight fit btw.

mr_D

iTrader: (12)

yeah on the classic there is 2. drivers side and passenger side. or if you want to keep it out of the way. come from battery into wing. and then go through the gromet behind the wing. thats a nice easy one.
only requires a few bolts and keeps the wire out of the engin bay

-Richard-

As said above the rubber grommit poke a screwdriver through it then poke the wire through, on my classic i took carpet up then door trims pop off its a piece of cake dude