Notices
Interior Gauges, steering wheels, seats etc

Shift Light

Thread Tools
 
Search this Thread
 
Old Mar 10, 2002 | 10:39 PM
  #1  
jonny concrete's Avatar
jonny concrete
Thread Starter
Scooby Regular
 
Joined: Dec 2001
Posts: 108
Likes: 0
Post

I want to install a shift light, has any one any experience or ideas?

stuart
Reply
Old Mar 11, 2002 | 10:15 PM
  #2  
CraigRA's Avatar
CraigRA
Scooby Regular
 
Joined: Feb 2002
Posts: 201
Likes: 0
From: Abbots Langley
Post

Omex do a range of different shift lights from about £65, I run one in my race car.
You can get either a single light that eluminates at a set rpm or a multi light that has a series of led's that can eluminate at setable intervals e.g. every 200 rpm upto the optimum.
You will really need to stick your car on the rollers so you know exactly at what rpm peak power is reached and set the light for that point.
Unless you are a serious track day addict or going to race the car I wouldnt bother, as you will never really get enough free road without some old fart in a Metro getting in the way to really exploit the benefit.
Reply
Old Mar 12, 2002 | 10:30 PM
  #3  
catflap's Avatar
catflap
Scooby Regular
 
Joined: Sep 2001
Posts: 1,322
Likes: 0
Talking

would you put the change point at peek or just after, so that when the next change comes in it meets peek again?
Reply
Old Mar 16, 2002 | 03:34 AM
  #4  
mook's Avatar
mook
Scooby Regular
 
Joined: May 2001
Posts: 1,449
Likes: 0
Thumbs up

I can thoroughly recommend Omex gear, not just because I retial it below RRP

It gets it's signal from your coil + and - (so if you have a coil per spark plug your buggered ) which means you can wire it into the back of the rev counter. You can set it in increments of 100 rpm. With the sequential you set the shift point and then the increments of the preceding lights, from 100 to 1000 rpm steps (closer the better IMHO).

I never thought I'd need one, after all I have a rev counter and can look at that, but I'd found that when you're in a situation up and around the redline, you don't have time to 'look' at a rev counter and so the shift light is very handy indeed!

They can also be mounted within the dash to give a proper OE look, if you're really handy you can mount them within the rev counter itself, although that takes some fidly work. Here's a pic of mine mounted between speedo and tacho, rather nice I reckon and very good visually

Reply
Old Mar 17, 2002 | 09:39 PM
  #5  
Bob Fuller's Avatar
Bob Fuller
Scooby Regular
 
Joined: Nov 2000
Posts: 162
Likes: 0
Post

Mook

I see you have a carbon Fibre type dial kit there? Where does it come from? How difficult is it to fit on a P1 with a Nitosport Carbon fibre kit alreadu installed?

Thanks
Reply
Old Mar 18, 2002 | 12:36 AM
  #6  
mook's Avatar
mook
Scooby Regular
 
Joined: May 2001
Posts: 1,449
Likes: 0
Post

Bob > sent you a note offlist, basicly they're a unique set provided by MJDesigns - http://www.mjdesignsuk.com
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
Phil3822
General Technical
0
Sep 30, 2015 06:29 PM
Jamz3k
Non Scooby Related
15
Sep 28, 2015 02:35 PM




All times are GMT +1. The time now is 06:40 AM.