Removing Trim
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Jan 2008
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Removing Trim
Just a quick question on removing some pieces of trim. When removing the central dash (heater controls) plastic as shown below, to remove the trim is it just a case of simply unclipping the ***** from behind to free it completely?
Image Source: ehgp publishing
Also how is the top two vents above this trim removed? Are there screws to remove or does it unclip and how is this done? Any issues with the Hazard Warning Light or the actual vent pieces being removed then?
Any help on this would be greatly appreciated guys.
Thanks in advance.
Image Source: ehgp publishing
Also how is the top two vents above this trim removed? Are there screws to remove or does it unclip and how is this done? Any issues with the Hazard Warning Light or the actual vent pieces being removed then?
Any help on this would be greatly appreciated guys.
Thanks in advance.
#2
Scooby Regular
iTrader: (21)
Join Date: Oct 2008
Location: Whitby, North Yorkshire
Posts: 3,016
Likes: 0
Received 0 Likes
on
0 Posts
On my 2003 STI, there is one or two plugs which just unclip from behind the controls, then it pulls out easy.
For the top one, mine has a cup holder which had 2 screws....cant see this with yours though? After the screws are removed if you have them, just pull on the bottom of the the vent surround. This unclips, and the hazard switch is just on one plug. The vents aren't attached as such.
For the top one, mine has a cup holder which had 2 screws....cant see this with yours though? After the screws are removed if you have them, just pull on the bottom of the the vent surround. This unclips, and the hazard switch is just on one plug. The vents aren't attached as such.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM