Chrome gear lever surround
#5
Aziz,
The surround comes with the leather gaitor and a fitting kit. You need to remove the gearlever console which is simple (remove the two screws on the handbrake console and pull it up and then simply gently pull the gearlever console off).
There is a backing plate in the kit that goes beneath this , the bolts go through the gearlever surround and are secured the other end with a nut. As you tighten these 8 bolts up the gearlever surround is effectively sandwiched onto the gearlever console.
So the backing plate goes beneath the gearlever console...the surround on top and then the bolts join the two together compressing it onto the console. It's extremely simple!
Regards
Nito
The surround comes with the leather gaitor and a fitting kit. You need to remove the gearlever console which is simple (remove the two screws on the handbrake console and pull it up and then simply gently pull the gearlever console off).
There is a backing plate in the kit that goes beneath this , the bolts go through the gearlever surround and are secured the other end with a nut. As you tighten these 8 bolts up the gearlever surround is effectively sandwiched onto the gearlever console.
So the backing plate goes beneath the gearlever console...the surround on top and then the bolts join the two together compressing it onto the console. It's extremely simple!
Regards
Nito
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM