Hi

Fitted a Kenwood DNX5022 the other day in my sti (Thanks for all the help of this site install went well). But I don't seem to be able to increase the sat nav guidance voice. The stereo volume goes low and the voice guidance comes out of the left speaker but is low. Does anyone know how to turn this up.

Thanks

Fergin

 

I'll have a look for you tomorrow night mate, I know it took me ages to work it out, sorry manual in car & freezing out there just now.

It's in 1 of the menu's, then 3 or 4 screens in, you can adjust volume, then either 1 or both front speakers

Frustrating bit is of you have the stereo faded to the rear, as you would if no rear seat pasengers, sat nav voice comes on and volume seems to go up in the rear

 

Thanks

For the life of me could not find where to adjust it

Cheers

Fergin

 

it tells you how to adjust the navigation volume in the manual.

 

page 63 if you can't be bothered looking up the index

 

You can change the volume in the setup, but also change the speaker to front right, that helps as well.

Once your happy with your main source output, if your in 2 zone mode, change it back to single zone, that will help, as the phone will then damp the main source to the front speakers when your getting voice direction

 

Sorry a bit late, but instructions as promissed

Set up menu, AV Interface, page 3 of this menu via the arrow / triangle top right of screen

2 settings NAV Voice & NAV voice interuption

 

Thanks for replies

Now sorted

Cheers

Fergin

 

am i right in saying the sat nav is an optional extra with this head unit?

 

No sat nav was standard

Fergin