Speaker sizes
20 May 2004, 01:13 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2004
Location: Swansea
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Speaker sizes
Am i correct in thinking 6.5 ins for the front doors & 4 ins for the rear doors? '01 bugeye.
Would it be poss to get 5 ins in the rear doors ?
Chris
Would it be poss to get 5 ins in the rear doors ?
Chris
Last edited by chrisjevans; 20 May 2004 at 02:44 PM.
22 May 2004, 10:40 AM
#5
Scooby Regular
Join Date: Dec 2002
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Aceman.... you can get 5 1/4 in the front very comfortably 
your'll find that the old units have a casing on the outer part of the speaker.. this fits nicely round your new replacement !
Chris... MY01 > the front speakers are 5" as standard but the doors will take up to 6.5". The rear doors are 4" as standard but will accomodate 5" with a little playing around.
The deciding factor is not necessarily the diameter, rather the magnet depth, as too deep a magnet will foul the window glass when wound down. the door panels will accomodate a MDF spacer of anything up to 18mm which allows for a fair range of speakers.
Hope this helps you both
Marie x
your'll find that the old units have a casing on the outer part of the speaker.. this fits nicely round your new replacement !
Chris... MY01 > the front speakers are 5" as standard but the doors will take up to 6.5". The rear doors are 4" as standard but will accomodate 5" with a little playing around.
The deciding factor is not necessarily the diameter, rather the magnet depth, as too deep a magnet will foul the window glass when wound down. the door panels will accomodate a MDF spacer of anything up to 18mm which allows for a fair range of speakers.
Hope this helps you both
Marie x
Thread
Thread Starter
Forum
Replies
Last Post