chiark

Anyone wanting to convert a double to single DIN thingy has a few options... How about this?

Subaru pocket, part number 66127SA000, cost a princely tenner plus VAT from your local subaru dealer.

Very neat, matches the dash better than the poor flash photo below suggests. The flap on it is "damped" and latched. Space inside for 3 CDs in jewel cases.



Should mention that you will need to drill a couple of holes in the mounting brackets to make this fit. That's the work of ten minutes even for the ham fisted like me . Also, the mounting brackets are not on show, so you can't go wrong

With the KDC-PSW9524 fitted...


Also, you need an Autoleads converter. Part number PC2-44-4, cost is 9.95 from most places.

Cheers,
Nick.

[Edited by chiark - 4/3/2003 10:00:33 PM]

Old_Fart

*PAH* I've gone and fit a SECS unit and a JVC Chaemleon head unit. Will hopefully get picces up this weekend..but I'm worse with 'pooters than I am with ICE
I give the CD cases to the wife to hold..more expensive than an autochanger in the long run maybe, but has some fringe benefits.
Rgds
Chuck

chiark

yeah, with her hands full, she can't belt you one?

The SECS unit does tempt me, but I think I'll fit my secs-type thingy in a pod on top of the dash. Need to write the software first tho

ramdor

iTrader: (2)

OI Nick... Gimmie boost/temp/oil gauges on an 8 inch touch screen... *drool*

Richie.

Edited to say looks tidy (Welsh accent coming through)

[Edited by ramdor - 4/4/2003 10:59:25 AM]

chiark

Can do boost out of the ECU, and coolant temp. Oil temp / pressure requires a sender unit. Know anything about data acquisition on PCs?

David_Wallis

he he he...

There is an easier way...

Ill speak to you when I see you..

David

chiark

You are *such* a tease!

David_Wallis

Ok, Ok... mail me.

David

ramdor

iTrader: (2)

I read something somewhere back in the mists of time about a plug that just went into the ecu socket under the steering wheel, had rs232 connection, null modem or whatever cable to the pc. Might have to do some searching Unless there is an easier way David?

Simon (psi3) mentioned that there is an rs232 header, on the back of the SECS mobo - will have to pester him about it

Cheers,

Richie.

PS. Not an electronics expert

chiark

scoobymonitor.co.uk do just the thing... Will have to work out how to interface this... But it looks very cool

lucky_strike

Chiark, just to go back to the top pic - how would the pocket look in a 01/02 with the lighter aluminium/plastic trim? Would it look out of place?

Thanks.
Richard.

chiark

Errrm, I'll try to have a look at an 01/02 to find out. To be honest, I didn't know that the dash had changed!

lucky_strike

I've not compared the two but I thought the metal-look insert panel was supposed to be a little darker on the 03 to give a more quality look (probably to match the darker alloy's as well?)

Must admit it didn't seem much different when I saw the 03 at the NEC.

Is the front of the pocket lighter then the surround or the same colour (it looks lighter in the pic but suspect thats a flash thing rather than anything else).

Cheers

chiark

It matches pretty well - to be honest, it probably matches the 02 just as well too... I *think* it's originally from a Forester?

lucky_strike

Thanks, looks like the solution I've been waiting for - for a tenner or so I can't go wrong. Now for the hard part, single din head unit selection.....

Dr Hu

Hehe - just fitted exactly the same thing!

The 03 Dash is actually quite a bit darker than the 01/02 which are much more 'silver'.

You are correct in that the hinged flap pocket is out of a new 03 Forester. (which also has the darker trim finish)

IMHO the flap would prolly look out of place on a 02, but depends how fussy you are. I personally can't stand the black plastic pockets which are fitted, as these warp and look shat. So anything is going to look better

Nick1

I have just rang my local dealer to order the pocket and the part number quoted above 66127SA000 is not know, they traced it to the following number.

66128AE000

Nick

map541

I just phoned my local dealer (Carstins, Coventry) and they say they can't find any record of this part number

Any ideas?

map541

Looks as if my question was answered!

chiark

Well, that's the part number on the invoice, and box, and...

churchwa

I really want that forester pocket, but every dealer i speak to has not heard of the code you gave. the other code is for the open pocket which does not look as nice. Any ideas?

chiark

Strange one this - other people have used this part number:
66128AE000

Cheers,
Nick.

DBY

Well i have just spoken to my dealer Sparshatts of botley quoting part number 66128AE000 no problems at all this the correct number.

John

churchwa

Yes, and that is the correct part number for the OPEN Impreza pocket not for the silver faced one from a forester that is showen in the picture.

chiark

Fair enough - I can only tell you what it says on my invoice, and what it says on the box that the thing came in then...

KT Greens were the supplying dealer - try them? 0113 284 3535.

Update us when you know!

Nick.

3times

Chiark,
What head unit is that in your picture?

I was thinking of a Sony Active Black Panel, Do you know is this will fit (ie. removable trim).

Any help would be appreciated as local ICE shops don't seem to know.

churchwa

Thanks for your help, apparently they have 2 parts listed under the same part number at 2 diffrent prices. The impreza pocket is more than the flap but the chap said that the dash is not an exact colour match and my eyes are very sensitive to things like that. So i just plumped for the standard pocket. Once again thatks for the help. I used your instructions to install my Pio 8400 and it went in like a treat.

Prodriver

I paid a visit to my local dealer and quoted the 66127 number - they came up with a blank.

I mentioned that it came out of a Forester and I took the parts man to an 03 Forester they were PDIing and showed him the actual bit of kit.

I went to pick it up today and he tried to fob me off with a poxy piece of black plastic in the shape of a single DIN blanking plate!!! I pointed out that this in no way resembled what he and I had seen in the Forester and all I got was a blank look!! Useless blanker!!

I'll try another localish dealer to see if the 66128 number is any good. Don't you just hate people that haven't got a clue what they are selling!!!

Nige

r

hi chiark! nice job,i have managed to get this part from a subaru dealer! i am going to fit a kenwood Z638 head unit do i need an auto lead connector,i presume it would be the same one you have fitted!do i have to remove any of the original dash(and re fit!)to get the h/unit in? hope this makes sense!
cheers chiark
simon

ps.not sure which prt no! but he assures me its the right one

scooby_si

map541 [thread hijack on] check out meet section the next Cov area scooby meet is on for Monday & i can't send u flyer etc since no addy in yer profile so forced to stalk u on here lol
Si