My radio cassette doesn't fit!
15 March 2000, 12:58 AM
#1
Scooby Regular
Thread Starter
Join Date: Mar 2000
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
I have a 96 WRX STi. The car has an AddZest (Clarion) radio cassette currently fitted. This is the unit it was imported with. I am trying to fit a Kenwood radio cassette with CD changer. I have managed to overcome the wiring issues with ISO blocks and all sorts. However, when I tried to put the Kenwood unit in situ the fascia panel gets in the way and the unit won't sit flush and the trim won't go back into place.
The AddZest fascia is the same dimensions as the metal body of the unit, the Kenwood fascia overhangs the metal body of the unit.
Am I missing something here?
Some advice would be appreciated!
The AddZest fascia is the same dimensions as the metal body of the unit, the Kenwood fascia overhangs the metal body of the unit.
Am I missing something here?
Some advice would be appreciated!
17 March 2000, 09:45 AM
#2
Scooby Regular
iTrader: (3)
Join Date: Dec 1999
Location: UK
Posts: 13,274
Likes: 0
Received 0 Likes
on
0 Posts
Steve,
You should be able to remove the 'collar' around face of the stereo. It should then just drop straight in!! I think it's the newer models with the removable collar. I know my MD MASK Kenwood, can do it!
Good luck
Andy
You should be able to remove the 'collar' around face of the stereo. It should then just drop straight in!! I think it's the newer models with the removable collar. I know my MD MASK Kenwood, can do it!
Good luck
Andy
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
Bazil_SW
Engine Management and ECU Remapping
24
21 September 2015 11:55 PM