WRX ice loom to ISO Converter
#1
Hi there,
Just in case you have a WRX or STi,
from Japan, then to fit a standard type radio you will need the following part no. from Autoleads to convert the wiring without any cutting of the loom :
PC2-44-4.
This is an Autoleads part number....got mine thru' Halfords for £7.60 inc.
Rgrds,
Bito
Just in case you have a WRX or STi,
from Japan, then to fit a standard type radio you will need the following part no. from Autoleads to convert the wiring without any cutting of the loom :
PC2-44-4.
This is an Autoleads part number....got mine thru' Halfords for £7.60 inc.
Rgrds,
Bito
#3
Hi there,
The std stereo's do physically fit, and you will need the cable, but you will also need a blanking plate or cubby hole to fill in the other half of the double-din hole. The stereo is held in by screws on two brackets inside the centre dash!
Good luck.
Bito
The std stereo's do physically fit, and you will need the cable, but you will also need a blanking plate or cubby hole to fill in the other half of the double-din hole. The stereo is held in by screws on two brackets inside the centre dash!
Good luck.
Bito
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM