rob84

iTrader: (5)

Morning all,

Been talking to Gareth @ UKOBD about organising a groupbuy on there ScanGuage 2, Basically the unit is just like the PSI3 Data monitor that you used to be able to get hold of.

this is a picture of the item you would be buying




here are some of the features of the Scanguage Unit

Trip Computer
Automatically tracks four sets of trip data - Each with 11 individually stored parameters.

* Maximum Speed
* Average Speed
* Maximum Coolant Temperature
* Maximum RPM
* Driving Time
* Driving Distance
* Fuel Used
* Trip Fuel Economy
* Distance to Empty
* Time to Empty
* Fuel to Empty


Digital Gauges
Display 4 gauges at a time from the 12 built-in digital gauges. the information is presented in Real-time!

* Fuel Economy
* Fuel Rate
* Battery Voltage
* Coolant Temperature
* Intake Air Temperature
* Engine Speed (RPM)
* Vehicle speed (MPH)
* Manifold Pressure (not available on some vehicles)
* Engine Load
* Throttle Position
* Ignition Timing
* Open/Closed Loop


Scan Tool
The ScanGaugeII allows you to troubleshoot your own car, read error codes, and the conditions present when the error occurred. You can also turn off the “Check Engine” light and avoid those costly trips to the mechanic.

* Reads Trouble Codes
* Reads conditions that set the Trouble Code
* Clears Trouble Codes
* Turns off the "Check Engine" light
* Tells you when vehicle is "Ready" to pass OBDII testing
* Make and store up to 10 rewritable special codes
to send to the vehicle computer

Unfortunatly this product only applys to vehicles manufactured in 2001 onwards and maybe some late 2000 models

more information available at
UKOBD Ltd. :: specialists in automotive on-board diagnostic tools

to make this groupbuy possible I need 10 people to sign up really before he will look at letting this groupbuy run, Unit usually retails @ £125 + p&p £131 inc p&p.

1:- Rob
2:- Robbo_22
3:- Drew
4:- Scooby Arthur
5:- TurboAndy
6:- Borderlinechris
7:- Rice Rocket
8:- Beakerdoo
9:- Scooby-S
10:-Gaity
11:-Kinghorn

Let me know what you think
Cheers
Rob


for 10 Units on the group buy is 10% discount so takes it to £112.50 + p&p so £118.50.

Scooby Arthur

iTrader: (2)

Yes please!

1:- Rob CS
2:- Robbo_22 TTS
3:- Drew TTS
4:- Sccoby Arthur
5:-
6:-
7:-
8:-
9:-
10:-

rob84

iTrader: (5)

Nice one, 4 more people needed

Rice Rocket

iTrader: (23)

Sounds interesting!! prices please

1:- Rob CS
2:- Robbo_22 TTS
3:- Drew TTS
4:- Sccoby Arthur
5:- Rice Rocket
6:-
7:-
8:-
9:-
10:-

rob84

iTrader: (5)

as soon as i here back from gareth i will post up asap cheers

Scooby-S

iTrader: (1)

I'm In

1:- Rob CS
2:- Robbo_22 TTS
3:- Drew TTS
4:- Sccoby Arthur
5:- Rice Rocket
6:-Scooby-S
7:-
8:-
9:-
10:-

rob84

iTrader: (5)

keep them coming lads, Nice result so far. didnt think it would be quite as popular tbh lol

Gaity

iTrader: (2)

Can't stop spending money on the Scoob at the moment so put me down too

rob84

iTrader: (5)

Prices added at the top of the thread,

anymore for anymore will see if i can get more off these Guy's if we have more interest

71/200

iTrader: (2)

My mate has one of these and it cant/wont read my JDM ecu?

We tried everything it said in the book and it still wont cant read the ECU. Its a standard ecu with ecutek map.

Does it actually support JDM cars?

KINGHORN

iTrader: (1)

Yip I'm in

rob84

iTrader: (5)

what year of car though ?? it doesnt just read subaru it read other makes to
as stated above 2001 onward and some late 2000 models

cant see why it wont read a jdm tbh

n one

iTrader: (5)

I`m interested, but mine`s an `03 JDM STi, could someone find out if it supports JDMs?

Also has anybody any ideas where you`d mount the unit?

Thanks, Neil.

rob84

iTrader: (5)

I have asked the question about the jdm ecu, I was waiting for the lad above to inform me what year of car he was fitting it to, as said above they will only work 2001 onwards and late 2000 models.

cant see why not, as iam sure the newage jdm ecu is the same as the uk just different setup they are all denso units but will hopefully have answers by morning

Gaity

iTrader: (2)

Sorry Rob & everyone else but I'm gonna have to pull out cos this morning the wife's bloody clutch on her Mini decided to pack up

Further Scoob mods therefore put on hold

Great start to the week ......

baz995

iTrader: (8)

is this item permanantly fitted or just plugged in when needed? only asking in case its a mare to fit.

regards

Luther

iTrader: (13)

UKOBD do a Blendmount bundle which sits this unit behind the rear view mirror. Any chance on a discount on the bundle?

rob84

iTrader: (5)

entirly your choice, most people run them all the time, so yes it would be plugged in all the time. depends what you want to do with the unit.
I can ask and see if the discount code he will supply will work on the bundle

no problem thanks for the heads up



Anyone on the group buy can pm me and i will source you with an individual code to be entered on the ukobd site for your discounts

n one

iTrader: (5)

So boys, have any of you an idea where to mount this unit?

Pics of one mounted would be great



Neil.

rob84

iTrader: (5)

One of the lads on our forum has just fitted one this his hawkeye, thats what started this off lol

take a look
Cumbrian Scoobs :: View topic - Scangauge fitting

71/200

iTrader: (2)

Rob, my car is a 2002 JDM RA, i think the ECUs are different to the UK models as some Ecutek features cant be loaded on.

Beastie

iTrader: (2)

Put me down for one please

Luther

iTrader: (13)

Seeing as I have a double-din headunit... the blendmount would be the only feasible way of installing this.... bit pricey though.

UKOBD Ltd. :: specialists in automotive on-board diagnostic tools

AndyMoody

iTrader: (2)

I've had one of these for sometime now. It comes with 2 velcro pads so I've had it stuck down near the clock pod and ran the cable out of the back (you can do side entry too) then in between the screen and the dash and then into the socket. It cable tied up so it doesn't go anywhere near your feet.

Scooby Arthur

iTrader: (2)

Nice install on the Hawkeye, thats what I am going for.

When can we get these ordered Rob?

n one

iTrader: (5)

Looks tidy Luther, the way forward if there`s discount on the bundle

I`d just like to make sure it`s compatable with an `03 JDM.



Neil.

rob84

iTrader: (5)

codes sent to the following.

KingHorn
ScoobyArthur
Beastie
borderlinechris

Can all other members please pm me for a code please.

also awaiting a reply for the blendmount bundle & compatability on jdm ecu
cheers
Rob

mikey30

interested in this but want to see if a GB bundle price happens!!!

KINGHORN

iTrader: (1)

ORDERED

rob84

iTrader: (5)

right for those who require the Blendmount bundle Yes it can be on the group buy also but the discount code i will produce is different to that of the scanguage unit itself so when you pm me please state which you want.

either
scanguage or blendmount bundle.



as for working with a jdm ecu this is the reply I got from gareth.

JDM is not covered by the EU regulations so it is difficult to advise. Generally as long as it is post 2001 it should be OK.