harvey

iTrader: (48)

Classic GT £285 inclusive of overnight delivery and Paypal.
RS Classic £335 inclusive of overnight delivery and Paypal.
GDB New Age £335 inclusive of overnight delivery and Paypal.
All intercoolers in stock.
Full fitting service starting from £150 inclusive of all ancillaries, for GT, Classic here in Darlington.
Full technical backup.

harveysmith1@btopenworld.com

340BHP-WRX

iTrader: (6)

Harvey,Can you please put me down for one classic GT kit and one classic RS kit.
Been trying to contact you today but my hotmail isn't working at all !

If you could pm me a contact number I will give you a call and sort out payment with you.

harvey

iTrader: (48)

Delivered.

wrxsti280

iTrader: (6)

what do i need in order to fit this to a my94 sti wagon, and what sort of money would i be looking at for the extra bits on top of the cooler?

thanks

harvey

iTrader: (48)

My kit comes complete with all the bits you would normally need to fit it including a 35 diameter silicon connector which will allow you to reuse your BOV but you will have to step down to your own actual BOV diameter. Done here the cost is nothing but if you have to buy a bit of silicon an off cut could do the job or you could buy something so allow a budget of up to £10.
If you are still on an OE airbox you will need a cone kit you can source yourself.
Before I despatch any kit I will replace the two jubilee clips for the core connection with 3" clamps.
The only other thing you might need on an 93-96 car would be an additional joiner and two clamps to allow you to cut the pipe to the throttle body in the vacinity of the water bottle to articulate that pipe to obtain a better fit.
Two clamps and a silicon joiner can be added to the kit for a further £10 but you may not need this.
The price includes Paypal and overnight delivery.

wrxsti280

iTrader: (6)

so do i have to go for induction, i cant stick with original airbox??

Biggs

iTrader: (14)

The standard airbox gets in the way of the intercooler pipeing as it comes up through the inner wing, so you would need to fit a cone filter to free up some space

wrxsti280

iTrader: (6)

ok cheers

wrxsti280

iTrader: (6)

ok cheers

wrxsti280

iTrader: (6)

ok cheers

harvey

iTrader: (48)

A case of the stutters?

wrxsti280

iTrader: (6)

hows that happened, my pc must be playing up or something i defo only posted once.

what would be the best induction to go for with one of these front mounts?

harvey

iTrader: (48)

You could make your own up and that is probably the cheapest solution but K+N kits or similar are available at varying prices from Roger Clark Motorsport, Revolution, etc.

harvey

iTrader: (48)

bttt:///

harvey

iTrader: (48)

bttt.///