Hello,

Having just got back into the scooby scene after a few years of boring cars, I have a blob eye with just the Nurspec back box, still has cat and centre silencer section, I would like it to have a little more rumble if I change the centre section leaving in both cats, would it be any louder? I don't want it too loud as Im sure the neighbours wouldn't appreciate it with my 330am starts

http://www.scoobyworld.co.uk/catalog...roducts_id=448

Something like the above

 

nur spec does get very loud i had 3 fines with a full system the next time i got pulled i was going to win a car crush

 

As above they are very loud with no cats!!! And with 3:30am starts, i would not bother, as you will upset the neighbours!!!

 

Must be a Nur Spec S that's fitted, as the R only fits with the Nur Spec centre section, IIRC.

I wouldn't want the hassle off my neighbours starting a full decat Nur Spec R at 3.30am, and that's me that hates my neighbours and has a full decat Nur Spec R!

 

It is just the S thats fitted, Thats why i mentioned I wanted to keep the cats, I'm aware how loud they are de-cated, But will replacing the centre section in the link just increase the sound a little??

 

Thats why I said I want to keep the cats

 

Probably quite a lot. Especially since you'll be starting the car early, when it'll be on cold start.

 

Hmmmmmm might see if I can find one to test, before committing, just in case, thanks Micky

 

I have a R at the moment with a bung fitted too, still pretty loud! I couldn't stick the noise of it without the bung.

 

If it's a WRX just remove the cat in the up-pipe, then you'll have the same cruise volume but gain a roar over around 4,000rpm. Shouldn't need a map until you add more air related mods.

 

Isn't the s a 2.5 inch back box where the r is 3inch? So it may not be as loud?

 

Everything will be loud in the silence of 3 30am!

 

100% agreed!