Lights are on!!
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Feb 2002
Location: Cambridge
Posts: 2,611
Likes: 0
Received 0 Likes
on
0 Posts
My handbreak light doesn't go off even when the hand break is..
anybody got any ideas as to what his could be pleasE ? ?
Probably done to death but I missed them... all
Cheers
#2
Scooby Regular
Join Date: Mar 2002
Location: Fcon Power Writer
Posts: 4,338
Likes: 0
Received 0 Likes
on
0 Posts
Had this problem for a month, the answer is.......
your front pads may be low, this was the problem on mine.
First thing to do is check your pads, then look at your brake fluid reservoir it will be filled to about half way!! this is your problem... i have found that my float in the brake fluid res does not float very well fill the fluid up to the top/full mark and 'hey presto' no more light!!
Cheers
Rob
your front pads may be low, this was the problem on mine.
First thing to do is check your pads, then look at your brake fluid reservoir it will be filled to about half way!! this is your problem... i have found that my float in the brake fluid res does not float very well fill the fluid up to the top/full mark and 'hey presto' no more light!!
Cheers
Rob
#5
Scooby Regular
Join Date: Mar 2002
Location: Fcon Power Writer
Posts: 4,338
Likes: 0
Received 0 Likes
on
0 Posts
The front brake pads being low causes a low level of brake fluid in the reservoir..... the handbrake light also operates as a low fluid level warning light, even though the handbrake is cable/shoes..
Rob
Rob
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
toyney83
General Technical
10
02 October 2015 08:38 PM
Phil3822
General Technical
0
30 September 2015 06:29 PM