kj200sx

iTrader: (7)

Does anyone have a modified ver 3 manifold that will bolt straight on to a ver 5 engine and heads as have bought a car with the a later engine fitted and the obviously the manifold won't fit if not will probably break the car 1997 catalunya in black be nice to get it running but can't be asked at the min to strip the motor out to change the heads if anyone has the above please let me know thanks

kj200sx

iTrader: (7)

Anyone been told I can change the loom and use the later inlet as only the idle control valve that is different and plug that attaches the bay loom in the arch or something are the same

scubbay

iTrader: (61)

carl davy does conversion plates I believe

kj200sx

iTrader: (7)

Is that a username ? Any contact details?

*matthewturb2000*

iTrader: (11)

I think the bolt holes don't line up?? I may be wrong

kj200sx

iTrader: (7)

Plugs on the newer wiring loom are different to the old one so don't look like that will work anyone got any other ideas befor I pull it apart or sell it ?

scubbay

iTrader: (61)

http://www.carldavey.co.uk/diary.php?id=71

kj200sx

iTrader: (7)

If you read no longer available and still have to get the manifold cut welded so not cost effective really I guess it's another breaker anyone interested in the whole car or bits let me know 1997 Catalunya in black

scoobyricht

iTrader: (4)

change the heads to v4 ones...

kj200sx

iTrader: (7)

Obviously can change the heads but not worth it to me to be honest stripping it all down to do it looks like another one leaving the road unless anyone interested in buying the whole car as a keeper open to offers