Raptorman

iTrader: (1)

My drivers side screen washer is not working. I have tried
to unblock it with a pin and no joy also pulled the pipe off
under the bonnet and water flows out fine so not pipe
blockage or pump failure.

How are the jets removed from the bonnet? Do they unscrew, twist
off....

*matthewturb2000*

iTrader: (11)

should have 2 notchs either side of the washer jet under the bonnet squeeze together and push , try putting the pipe on the jet and blow through the jet,

Raptorman

iTrader: (1)

Just had a look under the bonnet and the washer hose disappears
into a hole which is too small for my fat fingers to gain access!

Its a my97 uk turbo wagon.

jap_master

iTrader: (3)

i'd used an long flat nose pliers to get mine out.

sorry to jack the thread, but does anyone know why my passenger washer nozzle is leaking when i drive the car? it only happens when the engine water temp get hot, when i stop the car its still gushing out.

*matthewturb2000*

iTrader: (11)

haha put you fingers on a diet
try blowing through the jet itself might be blocked pull the pipe off at the join near the passenger strut and blow

*matthewturb2000*

iTrader: (11)

jet damaged inside ?try a nother nozzle?

Raptorman

iTrader: (1)

Well I sorted it. Managed to get the washer jet out with the
aid of a flat head screwdriver then removed the driver side
pipe and found the only problem was the restrictor so binned
it and replaced with a new piece of silicon hose and it's
working great now.

Cheers
for the help.

*matthewturb2000*

iTrader: (11)

Cool