Hi - my 06 hawk has developed a stuck secondary air valve - code P1410.

Spent morning trying to remove intercooler to reach the " easy valve "

so suspect the difficult one will be beyond my dexterity .

Has anyone in the Glasgow area had the system removed and the codes deleted ?

 

Driver side is a pain m8 but can be removed with "" I add
Lots of time & frustration / unless you have access 2 ramp & tackle from under removing downpipe / yes cell will be thrown / you will also need blanking plugs - cosworth ) try JW Racing about £65 for items / the whole system is a pain m8 but do the job correct - junk the system & fit plugs - will also take some clutter from your bay

 

Thanks m8
Sounds like you have done this already
Did you map out the codes ?
I have an original ecu so not sure how easy to get it done

 

Yes I run ecutek software & my mapper removed the codes / search on here I'm sure there is a few threads on the secondary air pump

Regards

 

I had andy forest map mine out.

& i fitted these