Hello I have an 06 plate hawk eye (pro drive) and the under tray keep coming loose it has be bolted up more than a few times an is really starting to **** me off it has bottomed out a few times but nothing to bad . Any Idea's on how to make it more secure or has anyone had similar problems ?

 

Can't remember if there are 6 or 8 bolts/fixings holding on the undertray (think it is 8) but if they are all there it should stay on with no problem. Some people run their cars without the undertray, I felt safer with it on.

If the bolts are coming loose why not put a little threadlock on them although this seems a little odd as I used to put copper slip on the threads to make sure they were easier to come out.

I think this link from an earlier post should help highlight the fixings :-

http://opposedforces.com/parts/impre...llustration_1/

 

4 bolts, 4 plastic press-in fixings and 2 plastic clips at the back (that also hold the front of the gearbox cover.)
The press-in trim studs have a habit of breaking eventually but I've never had a problem with anything coming loose!

JohnD

 

Take it off and be done with it, plenty of folk here running without an under tray including myself, never caused an issue.