What power to run on standard internals??
#1
What power to run on standard internals??
My car is 2005 blob sti type UK
33k on clock
Going back for final map next week just wondering what's power limit?
Car spec is
MD321V
HDI hybrid gt2 fmic
650cc injectors
K&N typhoon cold air induction
Williams Motorsport headers
3inch japspeed decat
3inch blitz nur spec r cat back
Exedy organic clutch
Cheers Ryan
33k on clock
Going back for final map next week just wondering what's power limit?
Car spec is
MD321V
HDI hybrid gt2 fmic
650cc injectors
K&N typhoon cold air induction
Williams Motorsport headers
3inch japspeed decat
3inch blitz nur spec r cat back
Exedy organic clutch
Cheers Ryan
#6
Scooby Regular
iTrader: (23)
Ryan,
650`s on standard fuel pressure are going to max out around 460-475 but if i`m right in thinking with another 0.5 bar of fuel pressure you should be able to cope with 510ish, I`m sure the MD321V a 500bhp rated turbo, Is it a billet too?
Just letting you know as come mapping day you dont want to be unprepared or if you are in doubt speak to your mapper beforehand, The choices would be either bigger injectors or an adjustable FPR to raise the fuel pressure a bit to squeeze more fuel through
Last edited by The Pink Ninja; 26 January 2013 at 07:36 PM.
Trending Topics
#8
Scooby Regular
iTrader: (7)
As above Ryan V should be making close to 500bhp if you have all supported mods.Buts still I would add bigger MAP sensor if your car will be mapped via SuperROM(CarBerry ROM)
Your injectors can be maxxed too at this level,FPR or bigger injectors will be needed if you will be looking for more power
Jura
Your injectors can be maxxed too at this level,FPR or bigger injectors will be needed if you will be looking for more power
Jura
#11
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
At around the 450bhp mark you should be contemplating a full rebuild on a 2ltr or going for a 2.1, you will just end up with a laggy car otherwise which will ruin the drivability of the car.
#19
Scooby Regular
iTrader: (24)
Join Date: Jan 2005
Location: West Mids
Posts: 3,704
Likes: 0
Received 0 Likes
on
0 Posts
Hi Jura
Firstly thanks for the pillar pod its spot on
Have been told that the 321s i have is billet
Either was what sort of figures do you think i'll see with the right mods 740's aps fmic etc etc
Cheers
Mark
Firstly thanks for the pillar pod its spot on
Have been told that the 321s i have is billet
Either was what sort of figures do you think i'll see with the right mods 740's aps fmic etc etc
Cheers
Mark
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM