fmic fitted now misfiring
Oct 28, 2012 | 05:19 PM
Thread Starter
Joined: Aug 2011
Posts: 41
Likes: 0
From: enfield
fmic fitted now misfiring
i have just fitted the fmic and tried going round the block but it seemed rough and was misfiring.
has anyone experienced this?
thanks
Oct 28, 2012 | 05:25 PM
Joined: Mar 2010
Posts: 16,950
Likes: 1
From: crawley :)
Quote:
Originally Posted by
rossbrown316
i have just fitted the fmic and tried going round the block but it seemed rough and was misfiring.
has anyone experienced this?
thanks
dont fit parts like this without a remap or your engine will go booooooooooooooooommmmmmm!!!!!
Oct 28, 2012 | 05:37 PM
Thread Starter
Joined: Aug 2011
Posts: 41
Likes: 0
From: enfield
thanks for your help i might take it off for now and save the pennies for a remap
Oct 28, 2012 | 05:43 PM
Joined: Sep 2011
Posts: 1,415
Likes: 0
From: ipswich
Quote:
Originally Posted by
tubbytommy
dont fit parts like this without a remap or your engine will go booooooooooooooooommmmmmm!!!!!
What he said
Oct 28, 2012 | 05:44 PM
Joined: Sep 2011
Posts: 1,415
Likes: 0
From: ipswich
Tho these must have been a boost leak
Oct 28, 2012 | 05:45 PM
Joined: Mar 2010
Posts: 16,950
Likes: 1
From: crawley :)
Quote:
Originally Posted by
blackvenom
Tho these must have been a boost leak
this is true but either way it will need mapping.
if it made the sound of a baloon going down this is boost leaking
Last edited by tubbytommy; Oct 28, 2012 at 05:48 PM .
Oct 28, 2012 | 05:51 PM
Joined: May 2009
Posts: 5,923
Likes: 10
From: 2.0 bar
Sounds like a boost leak. I take it you have a MAF?
Re check all the pipework & make sure everything is connected properly. You should not get any hesitation after fitting a FMIC. Regardless of remap.
Oct 28, 2012 | 06:24 PM
Thread Starter
Joined: Aug 2011
Posts: 41
Likes: 0
From: enfield
it still has the maf and will it 100% need a remap?
Oct 28, 2012 | 06:25 PM
Joined: Mar 2010
Posts: 16,950
Likes: 1
From: crawley :)
Quote:
Originally Posted by
rossbrown316
it still has the maf and will it 100% need a remap?
for the last time
YES IT NEEDS A REMAP
Oct 28, 2012 | 06:38 PM
Joined: Jun 2006
Posts: 7,899
Likes: 0
From: The Fabulist Hunter
Oct 28, 2012 | 06:48 PM
Thread Starter
Joined: Aug 2011
Posts: 41
Likes: 0
From: enfield
its 2004 and i will get a remap soon
thanks for you help
Oct 28, 2012 | 07:15 PM
Joined: Apr 2000
Posts: 6,252
Likes: 1
From: Havering, Essex
Quote:
Originally Posted by
rossbrown316
its 2004 and i will get a remap soon
thanks for you help
Mine ran perfectly well after the FMIC instal. I never used a lot of throttle but it ran and boosted fine although laggier than before. I kept an eye on the KS3 knock meter and if anything was less active than before!
It's now got a bigger turbo and mapped.
If it was misfiring, there must be a problem somewhere.
JohnD
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
17
Nov 3, 2021 11:07 AM
JonMc
Subaru Parts
22
Feb 6, 2016 09:50 PM
Gooch89
General Technical
11
Dec 30, 2015 03:31 PM
Belly07
Subaru
2
Nov 12, 2015 03:46 PM
Reshard1977
Subaru Parts
9
Sep 22, 2015 11:48 PM