how to change classic spark plugs?
Scooby Regular
iTrader: (2)
Joined: Apr 2004
Posts: 15,029
Likes: 0
From: Somewhere in Kent, sniffing some V-Power
Driver's side - remove air filter to allow better access
Passenger side - Remove washer bottle and may be battery for same reason
Then it is just a case to making sure the plugs are gapped correctly (think it is 0.9mm but you will need to search on here to check), remove ht leads, remove old plugs and fit new ones.
Quite simple really. This the point at which you usually discover that you rocker cover gaskets are weeping.
Or, you could have just searched on google and found this:
Passenger side - Remove washer bottle and may be battery for same reason
Then it is just a case to making sure the plugs are gapped correctly (think it is 0.9mm but you will need to search on here to check), remove ht leads, remove old plugs and fit new ones.
Quite simple really. This the point at which you usually discover that you rocker cover gaskets are weeping.
Or, you could have just searched on google and found this:
Last edited by Gear Head; Sep 25, 2012 at 11:51 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Bazil_SW
Engine Management and ECU Remapping
24
Sep 21, 2015 11:55 PM