racedynamix remap with japspeed decat bits
20 July 2012, 09:14 PM
#1
Scooby Regular
Thread Starter
Join Date: Sep 2011
Location: hampshire
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
racedynamix remap with japspeed decat bits
ive had japspeed decat up-pipe, decat 3 inch down pipe and a decat 2 and a half inch centre section fitted today along with a racedynamix remap, the problems im having are that the gaskets that have been supplied are not very good and are blowing, ive got genuine metal subaru gaskets now for both ends of the up-pipe and turbo to down pipe, What is the best way of connecting the 3inch down pipe to the 2 1/2 centre section would it be a 3inch gasket and a 2 1/2 inch gasket sandwiched together as that is were the worst blow is please help, apart from these im happy with the remap.
20 July 2012, 09:24 PM
#2
Scooby Regular
Join Date: Apr 2004
Location: Cymru
Posts: 1,147
Likes: 0
Received 0 Likes
on
0 Posts
ive had japspeed decat up-pipe, decat 3 inch down pipe and a decat 2 and a half inch centre section fitted today along with a racedynamix remap, the problems im having are that the gaskets that have been supplied are not very good and are blowing, ive got genuine metal subaru gaskets now for both ends of the up-pipe and turbo to down pipe, What is the best way of connecting the 3inch down pipe to the 2 1/2 centre section would it be a 3inch gasket and a 2 1/2 inch gasket sandwiched together as that is were the worst blow is please help, apart from these im happy with the remap.
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
