classic headers fit newage?
#3
Former Sponsor
iTrader: (48)
There are two sets of headers on a Classic. MY93-96 are bulbous with a Lambda sensor threaded hole in the collector.
MY97-00 are slimline but with no Lambda sensor tapping at the collector.
MY01 > are the same as 97-00 but have a Lambda sensor hole at the collector.
All of these are interchangeable and the crosspipe with the expansion bellows is the same MY 93-05. All single scroll.
MY97-00 are slimline but with no Lambda sensor tapping at the collector.
MY01 > are the same as 97-00 but have a Lambda sensor hole at the collector.
All of these are interchangeable and the crosspipe with the expansion bellows is the same MY 93-05. All single scroll.
#4
Scooby Regular
Join Date: Apr 2014
Location: Loughborough
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Another thread revival....
I'm trying to source info and came across this. Have just ported the exhaust manifold and on sepeating the crosspipe I noticed it had what looked like a cat or smaller inner pipe running down it and couldn't really be ported.
Have looked for upgraded cross pipe but can only find the grimmspeed x-pipe for new age nothing for classics. From reading the above would this http://www.grimmspeed.com/hiflow-exh...x-all-sti-lgt/ fit a classic.
I'm trying to source info and came across this. Have just ported the exhaust manifold and on sepeating the crosspipe I noticed it had what looked like a cat or smaller inner pipe running down it and couldn't really be ported.
Have looked for upgraded cross pipe but can only find the grimmspeed x-pipe for new age nothing for classics. From reading the above would this http://www.grimmspeed.com/hiflow-exh...x-all-sti-lgt/ fit a classic.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM