Hey folks ordered some things *from torques uk through eBay quality kit

Problem is trying to get my -6 hose into the -6 fitting isn't working*

Here's the link to the two

http://www.ebay.co.uk/itm/6-AN6-06-4...#ht_1134wt_689

http://www.ebay.co.uk/itm/6-8mm-5-16...a#ht_846wt_689

I can't for the life of me get this to go in am I doing something wrong or have I bought the wrong stuff?

Also noticed these would I have been better off with these

http://www.ebay.co.uk/itm/6-AN6-45-D...5#ht_888wt_689

Steve

 

Steve did you check out my thread i used teflon braided lines is this what you have ?

As there's a nak to it got it down to a tee !

 

Ive just made some pipes up with parts from torques. They are very tight to get together. Watch the link to the video they give you. Pay special attention to any burs on the Teflon. I found after fitting the olive that putting a brad down the pipe made things a bit easier.

You definatley need a vice, a good saw and a bit of patience.

Once you get the first one they become easy. Also be aware not to get any of the steel braiding in the nut thread. I ruined a connector this way.

 

Hi guys thanks for the replies the hose I'm using is in that link

I've proper scraped inside one of the 45 degree bends it just won't fit lol might get a pro to do it lol

 

Right the only way to do this is to boil a kettle and fill a cup with boiling water.

After cutting the braided line in the correct position pull back the braid and dip the end into the boiling water ,do the same with the fitting for about a minute,then take out from the water and carefully slide the olive over the ptfe inner being careful as this is quite hot but slips over a treat ,then do the same with the fitting that you also heated up they fit on a treat this way came accross this method by accident but i have done over 30 teflon ends this way and was spot on!!!!

 

 

Perfect mate cheers

The ones I ordered never came with the clip please see the second eBay link the 3rd link was me asking if I should buy these as I thought i might of bought the wrong ones

Can you tell me if there is a major difference in these two

Steve

 

the first 2 links are fast fit and the last link is what i have used for my teflon braided lines if you speak to alex from tourques mention my name hell sort you out really nice chap i have his mobile number if you want it .

cheers lee

 

They get my cot for customer service and quality as well. I've ordered parts at half 2 on a Friday afternoon and they arrived before 9 Saturday morning.

 

What's the difference buddy are they not the right ones I though I'd ordered the wrong ones lol can you on me his number and I'll
Buzz him Tomoz

Cheers

Steve