I am looking into replacing my gearbox and i am not sure which codes are compatable. Can anyone tell me which part of the code is important please.

My code is TY752VN5BA.

Reading other threads it looks to me that it is just the TY752 part that needs to be the same.

 

yes 752 is what u need

 

Thank you for the fast response. good to have a second opinion lol

i have just found this on another forum so here it is for future reference.

Transmission identification codes start with a "T" and an example would be:

TY856WB1AA

"T" = transmission code

"Y" = that it is a manual awd gearbox

"85" = the transmission classification...in the case of manual gearboxes this number indicates the gear shaft spacing in millimeters. 6-speed transmissions use an 85mm shaft spacing while the current generation of 5-speed transmissions use a 75mm shaft spacing.

"6" = some reference to the transmission case. "6" is used for 6-speeds, "4" is used for 8-bolt 5-speeds, "2" for 4-bolt Impreza 5-speeds, "5" for Forester 8-bolt 5-speeds, "3" for 4-bolt Forester 5-speeds, and "7" for some Legacy turbo 8-bolt 5-speeds.

"W" = transmission specification. "W" is 6-speed, "V" is 5-speed, "Z" = AT with MPT, "Y" = AT with VTD, etc.

"B1AA" = indicates various details about the equipment such as center diff. type, front LSD, etc. and also about minor production changes.