Crank pulley bolt torque?
#1
Scooby Regular
Thread Starter
Join Date: Nov 2011
Location: Crawley, West Sussex
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Crank pulley bolt torque?
I'm sure this has been done to death already but has anyone got any idea of the crank pulley bolt torque on the 2.0 turbo impreza lump? My car is a 2002 wrx if that helps?
Cheers.
Cheers.
#2
Scooby Regular
Join Date: Jun 2003
Location: Either buying or burning 99RON fuel !!
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
The Subaru WSM for MY04 (blobeyes) says:
(1) Clean the crankshaft pulley thread using an
air gun.
(2) Apply engine oil to the crankshaft pulley bolt
seat and thread.
(3) Tighten the bolt temporarily with tightening
torque of 44 N·m (4.5 kgf-m, 33 ft-lb).
(4) Tighten the crankshaft pulley bolt.
Tightening torque:
180 N·m (18.3 kgf-m, 132.7 ft-lb)
Be surprised if the MY02 was different.
Also gives the figures for angular gauges if you need.
Cheers,
S.
(1) Clean the crankshaft pulley thread using an
air gun.
(2) Apply engine oil to the crankshaft pulley bolt
seat and thread.
(3) Tighten the bolt temporarily with tightening
torque of 44 N·m (4.5 kgf-m, 33 ft-lb).
(4) Tighten the crankshaft pulley bolt.
Tightening torque:
180 N·m (18.3 kgf-m, 132.7 ft-lb)
Be surprised if the MY02 was different.
Also gives the figures for angular gauges if you need.
Cheers,
S.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM