Help! EJ20GN head torque setting
08 September 2011, 11:40 AM
#1
Scooby Regular
Thread Starter
Help! EJ20GN head torque setting
Can someone tell me what the torque setting is for EJ20GN heads with 1.6mm Cometic SS Head Gaskets PLEASE......
Thanks if you can help 
08 September 2011, 12:57 PM
#2
Scooby Regular
Thread Starter
??????????????????????????????????
Is this right??
Cylinder heads sequence :-
Bolt sequence
3 1 6
<front of engine<
5 2 4
1)Apply a coat of oil to washers and bolt threads
2) Tighten all bolts to 29 nm or 22lbs/ft
Tighten all bolts to 69 nm or 51lbs/ft
3)Back off all bolts by 180 degrees and then back them off by a further 180 degrees
4)Tighten bolts 1 and 2 to 34 nm or 25 lbs/ft
5)Tighten bolts 3, 4, 5 and 6 to 15 nm or 11 lbs/ft
6)Tighten all bolts by 80-90 degrees
7)Tighten all bolts by a further 80-90 degrees (do not turn more than 90 degrees)
Is this right??
Cylinder heads sequence :-
Bolt sequence
3 1 6
<front of engine<
5 2 4
1)Apply a coat of oil to washers and bolt threads
2) Tighten all bolts to 29 nm or 22lbs/ft
Tighten all bolts to 69 nm or 51lbs/ft
3)Back off all bolts by 180 degrees and then back them off by a further 180 degrees
4)Tighten bolts 1 and 2 to 34 nm or 25 lbs/ft
5)Tighten bolts 3, 4, 5 and 6 to 15 nm or 11 lbs/ft
6)Tighten all bolts by 80-90 degrees
7)Tighten all bolts by a further 80-90 degrees (do not turn more than 90 degrees)
08 September 2011, 04:32 PM
#4
Scooby Regular
Join Date: Feb 2002
Location: Sunny Dorset
Posts: 1,077
Likes: 0
Received 0 Likes
on
0 Posts
4 & 5 should read tighten all to 29nm / 22lbft
7 should be tighten a further 45 degrees, then tighten 1 & 2 a further 45 degrees
As per autodata and most workshop manuals.
7 should be tighten a further 45 degrees, then tighten 1 & 2 a further 45 degrees
As per autodata and most workshop manuals.
Thread
Thread Starter
Forum
Replies
Last Post
johnnybon
Wheels And Tyres For Sale
7
25 September 2015 07:49 AM