air/flow controller removal???
07 September 2011, 08:26 AM
#1
Scooby Regular
Thread Starter
Join Date: Sep 2011
Location: Colchester
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
air/flow controller removal???
just bought my scoob and i have a Pivot air flow controller which looks like it has been piggy backed into the ecu wiring? anyone know where i can get a wiring diagram to show me every wire coming from ECU so that i can remove it?
it drives like **** with it on there
it drives like **** with it on there
07 September 2011, 01:00 PM
#2
Used to have one many years ago when I bought my first impreza,first off all can you switch it off?
imo your best bet is to take to a subaru specialist to see if they can help,i did when I had mine removed.
imo your best bet is to take to a subaru specialist to see if they can help,i did when I had mine removed.
Last edited by myblackwrx; 07 September 2011 at 01:01 PM.
07 September 2011, 05:07 PM
#3
Scooby Regular
Thread Starter
Join Date: Sep 2011
Location: Colchester
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
No it's constantly on as the fella before wired it live thru ecu... I've traced the wires back but need wiring diagram to safely remove it without ruining anything else on it
08 September 2011, 12:18 AM
#4
Think you may be screwed as the only diagram there seems to be was on the PivotUSA website and that's long gone.
Workshop manuals here
https://www.scoobynet.com/technical-...d-updated.html
may help to identify what wires you should have and thereby help you eliminate the ones you shouldn't have.
Workshop manuals here
https://www.scoobynet.com/technical-...d-updated.html
may help to identify what wires you should have and thereby help you eliminate the ones you shouldn't have.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM