hks bov
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Sep 2006
Location: Sheffield
Posts: 946
Likes: 0
Received 0 Likes
on
0 Posts
hks bov
does anyone know where to get the proper flange/adapter to fit the bov to a bugeye. I have got one but its not the proper one so the bov doesnt fit in the space - it hits the manifold
#3
Scooby Regular
iTrader: (3)
somebody just gave me a copy HKS bOV yesterday its held in on the universal flange by a C clip is this how proper HKS 1's are held in or are they screw on? what adapter plate would i need? ebay jobbie?
i assume it will be man enough for standard boost! lol
i assume it will be man enough for standard boost! lol
Last edited by LewisL; 10 August 2011 at 01:58 PM.
#6
Scooby Regular
iTrader: (51)
Join Date: Nov 2002
Location: MSOC
Posts: 7,439
Likes: 0
Received 0 Likes
on
0 Posts
Best to contact sumopower mate as they will be able to tell you which you need. Failing that I have got the one from eBay and have trial fitted it and it is snug but does fit and is only £20.
Trending Topics
#10
Scooby Regular
iTrader: (6)
Join Date: Feb 2011
Location: oxford
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
u will also need a 33mm bung and a meter of 5mm internal diameter fuel/vacuum hose because the filter that is given is a waste of time it just pops of also i have put hose clips on all of the joins on mine for peace of mind
sorted when fitting remove the metal vacum hose on the intercooler for more access also u will need to get the plate fitted to the bov then twist it enough to get in its a very tight fit and takes a bit of perseverance to get it on
sorted when fitting remove the metal vacum hose on the intercooler for more access also u will need to get the plate fitted to the bov then twist it enough to get in its a very tight fit and takes a bit of perseverance to get it on
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
crazyspeedfreakz
Wanted
17
05 October 2015 07:19 PM