Davey96wrx

iTrader: (1)

Hey guys I had a search but not many definate answers came up, how many wires should mine have and could anyone recommend a place to get them from, I know it's been done to death previously sorry chaps

hpoolsteve

iTrader: (4)

I believe yours is 4 wires. Be aware of the cheap ebay imitations. Buy a genuine Bosch one. Do a search in google there are loads of places that sell these. Alternatively i have just ordered a second hand from scooby parts who is a member on here. Give him a PM he breaks lots of classics and no doubt he will have one

Tazman861

iTrader: (2)

If yours is in the drivers side exhaust manifold it is a 3 wire version and new they are around £160 from somewhere like Camskill - if you send them your chasis number they will confirm exactly which one is for your car

slyv12

iTrader: (3)

Don't buy an cheap one, I put one in to get through the MOT and have to take my turbo off to get the metal tip out of the turbo housing as it snapped off. Replaced it with the bosch universal 3 wire for £52.80 from here: http://www.lambdasensor.com/main/subaru3.htm.

Think they do 4 wire too.

Just don't use the wire extender connecter that it comes with, get some silver solder and join the wires to your original plug properly.

Mines a 95 wrx, don't know if its the same as a 96.

Simon.

Davey96wrx

iTrader: (1)

Cheers Simon, that's exactly what I needed, mine will be the same as yours I believe. Cheers gents, I'll hopefully have her running well eventually!!!?