Hi guys own a subaru impreza v2 sti.


and ive just bought a 7d ecu which has a esl live daughter board chip fitted it has never been mapped i no it will fit my car but will i need to change the esl chip to my ecu or can this the 7d just be mapped to my car


thanks in advance

roy

 

ESL will be soldered onto the ECU board, so you`ll need to plug it in get it mapped (as long as it will fit).

My advise is to book it in with a mapper drive it there then change the ECU there, as running an unknown ECU can do loads of nasty things, where as the mapper can set it up for you.

 

the ecu will fit has its a 4 plug 93 to 96

thats was going to do book it in with a mapper just wanted to knw if it could be mapped fitted on the 7d ecu cheers

 

The ESl can be fitted to any early ecu where there is a carrier slot for it. most ecus dont have the carrier slot but as that 7D does it will slot straight in and take over control off everything map wise once mapped.

 

Thanks Duncan Much appreciated.

 

Roy the 7d is from was from my UK 1996 turbo 2000 was fitted to the ecu and the correct resister cut this can be fitted straight to the car when you want it mapped

 

Thanks mate