rear lights
#1
Scooby Regular
Thread Starter
Join Date: Sep 2010
Location: under the bonnet
Posts: 935
Likes: 0
Received 0 Likes
on
0 Posts
rear lights
I am removing my lexarse lights, but just want to know, how is the coloured plastic bit under the lights held on? I havnt took the lights off yet, but i want to make sure as i dont want to repaint anything as the lights i am buying have a green plastic bit underneath...
#4
Scooby Regular
iTrader: (2)
As above, two screws once the lights are off.
Reseal/reseat in a NON-SETTING compound, the best stuff is this: http://cgi.ebay.co.uk/CARAVAN-MOTORH...item3a63790209
DO NOT use silicone, or TigerSeal/SikaFlex, not if you ever want the lights out again
Reseal/reseat in a NON-SETTING compound, the best stuff is this: http://cgi.ebay.co.uk/CARAVAN-MOTORH...item3a63790209
DO NOT use silicone, or TigerSeal/SikaFlex, not if you ever want the lights out again
#5
Scooby Regular
Thread Starter
Join Date: Sep 2010
Location: under the bonnet
Posts: 935
Likes: 0
Received 0 Likes
on
0 Posts
As above, two screws once the lights are off.
Reseal/reseat in a NON-SETTING compound, the best stuff is this: http://cgi.ebay.co.uk/CARAVAN-MOTORH...item3a63790209
DO NOT use silicone, or TigerSeal/SikaFlex, not if you ever want the lights out again
Reseal/reseat in a NON-SETTING compound, the best stuff is this: http://cgi.ebay.co.uk/CARAVAN-MOTORH...item3a63790209
DO NOT use silicone, or TigerSeal/SikaFlex, not if you ever want the lights out again
Haha, Thanks, i am finding that out for myself now. They have been sealed with bathroom silicon by the looks of it!
Cheers guys
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM