Newage stall on gear change.
20 February 2011, 03:44 PM
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Feb 2009
Location: Twickenham
Posts: 1,272
Likes: 0
Received 0 Likes
on
0 Posts
Newage stall on gear change.
Over the last few days i find that every time i change gears as i release the clutch the car hesitates a bit before it gets going again. This is very, very slight but enough for me to notice.
I am going to change plugs first as i have a set in the garage but maybe someone on here has had the same problem and can shed some light.
Car in question is a 2005 STi UK Prodrive pack running 333bhp, everything standard.
I am going to change plugs first as i have a set in the garage but maybe someone on here has had the same problem and can shed some light.
Car in question is a 2005 STi UK Prodrive pack running 333bhp, everything standard.
21 February 2011, 02:08 PM
#4
Scooby Regular
iTrader: (5)
Join Date: Sep 2001
Location: Bromley
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
I had my neutral position switch replaced twice, I think this only really affects the vvt and wouldn't cause it to stall.
Have you checked the idle control valve?
Have you checked the idle control valve?
21 February 2011, 09:44 PM
#5
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Feb 2009
Location: Twickenham
Posts: 1,272
Likes: 0
Received 0 Likes
on
0 Posts
Will check both Idle control valve and NPS. Cheers. Power still feels good but there is just something not right with her. I would like to get to the bottom of this as i have a MD321H to fit and would hate to have the mapper return again due to some fault we can not fix on the day.
Last edited by fastboyslim; 21 February 2011 at 09:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM