im braking in my 2.2 i did a oil change this morning with millers running in oil after i done it whent in for a brew came out and checkt the oil reading and nothing not reading no leaks or nothing or is it coz off the oil takes ages to drop

 

What oil reading? The dipstick?

It's hard to understand your post, but are you saying you've drained the old oil and none came out, or that you have refilled but can't see it on the dipstick yet?

 

sorry draind it put on a new oil filter filled it up and nothing is going on dip stick

 

Probably not put enough oil in yet mate.

 

sump holds 4ltr and i put in 5ltr just had a look its starting to go on dip sitck lol

 

It can take a while, ESPECIALLY in cold weather.

Put in the CORRECT amount according to the manual, then walk away for a couple of hours, before checking it on a LEVEL area.

 

ok pal will do cheers

 

you did put the sump plug back in - yes?

 

yea i did lol

 

They are a NIGHTMARE to read mate, as others have said take your time and top up slowly.

 

you will notice (well on mine anyway) the dipstick seems to read to different levels depending and what side you look at