When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Usually a sensor problem or wiring related issue they are located one on the osr arm & nsf arm. check and make sure the ball and socket isnt too tight as it wont move easilly.
Awesome! So do i just check the plugs,or remove and clean?
Check the linkage isnt seized up on the little arms of the sensor, Check the wiring for the usual cuts or rubbing marks, pull the plug off and make sure theres no water ingression into the units. Thats pretty much all you can do. I'm sure you need the light reset by a dealer though as it doesnt come through on a normal fault code system
Check the linkage isnt seized up on the little arms of the sensor, Check the wiring for the usual cuts or rubbing marks, pull the plug off and make sure theres no water ingression into the units. Thats pretty much all you can do. I'm sure you need the light reset by a dealer though as it doesnt come through on a normal fault code system
Weird..went out in the car earlier..started the engine..light has stayed off??