fitting a boost gauge to a 99 HELP :(
#1
Help need fitting an autometer gauge, someone said i may need some rubber hose? (onto the outlet manifold on the engin thats blanked off) i cant seem fo get hoild of this stuff anywhere.
My car is a uk99 If anyone knows the best way to fit it please help
Or if yo ugot some spair hose knocking around
Catflap
My car is a uk99 If anyone knows the best way to fit it please help
Or if yo ugot some spair hose knocking around
Catflap
#3
check out http://www.chiark.co.uk/scooby/
Chairks website will tell u how to fit the gauge.
[Edited by Vinesh - 4/3/2002 10:09:16 AM]
Chairks website will tell u how to fit the gauge.
[Edited by Vinesh - 4/3/2002 10:09:16 AM]
#4
catflap
the problem is the autometer gauges dosen't come with the joining pipe between the nipple and the gauge piping provided.
i used a peice of diesel fuel pipe from halfords.
i fitted mine before christmas and have had no problems.
i keep meaning to buy a piece of proper boost piping sometime, if i every see some.
i'll show you what i did with mine at the big one, sunday.
ps, did you buy a dawes in the end, how is it ?
Kevin
(240bhp green MY99 at John nobles rr day)
the problem is the autometer gauges dosen't come with the joining pipe between the nipple and the gauge piping provided.
i used a peice of diesel fuel pipe from halfords.
i fitted mine before christmas and have had no problems.
i keep meaning to buy a piece of proper boost piping sometime, if i every see some.
i'll show you what i did with mine at the big one, sunday.
ps, did you buy a dawes in the end, how is it ?
Kevin
(240bhp green MY99 at John nobles rr day)
#5
What I did (on my MY01) was get a 1/8" T-piece from halfords, in their washer jet department. with a little drilling down one of the pipes on the t-piece, the autometer stuff fitted right in. I glued it for some security. rubber hose fits nicely on the t-piece, and on the MY01 you have to tee off an existing pipe.
Since you've got a nipple to use, you could get the same t-pice from halfords, and fix the autometer pipe into it as above. then chop that part of the t-piece off, and you should find that your rubber hose will fit onto it, thus using one third of the t-pice as an adaptor. secure with zip tie. put other end of rubber hose on the manifold nipple.
Since you've got a nipple to use, you could get the same t-pice from halfords, and fix the autometer pipe into it as above. then chop that part of the t-piece off, and you should find that your rubber hose will fit onto it, thus using one third of the t-pice as an adaptor. secure with zip tie. put other end of rubber hose on the manifold nipple.
#6
Cheers for the info
The problem was not how to fit the pipe, but more where to get the pipe from, youve been most helpfull, im off to the scrappy to get me some pipe
Cheeres me deers
LOL youll laff when you see where ive put the gauge hehe its in the cup holder taped in, looks bloody terrible, but its only so i can fit my dawes i plan on a 3 pod mount later this year
The problem was not how to fit the pipe, but more where to get the pipe from, youve been most helpfull, im off to the scrappy to get me some pipe
Cheeres me deers
LOL youll laff when you see where ive put the gauge hehe its in the cup holder taped in, looks bloody terrible, but its only so i can fit my dawes i plan on a 3 pod mount later this year
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM