Scoobylover2829

hello all, need a bit off help here, i bought a subaru map sensor for my project car and was just wondering what wires are the 5v imput, sensor output and ground wire the wires are red green and white, thanks lee

my94wrx

iTrader: (4)

year of car the sensor is being fitted to and the year of car the sensor came off will help us give you the correct info, also are you planning to have the car mapped to accommodate the sensor or just fit it and leave as is?

Scoobylover2829

Hmm i got if from a Subaru impreza turbo at the scrappy, dont know the year but was the shape with the square front lights if that helps? sorry i didnt really pay attention hope any off that information helps, yeah im getting it mapped many thanks, lee

Splitpin

If it's a Subaru part Lee, it'll have a part number on it. Tell us what that is (should be a 10 digit alphanumeric code) and we can work out what model year it's from, and from that give you the pinout, maybe even a calibration curve, if you need one.

Scoobylover2829

ok thanks will go look now and post it up

Scoobylover2829

Damm it on the back there is a silver sticker and most off the part number is worn off all i can read is 20 i think at the end, damm it any other way off finding it out? like testing with a multimeter or something? i have looked everywhere and joned 3 forums and i cant find anything

Splitpin

Post us up a picture of it!

my94wrx

iTrader: (4)

if its got the silver /foil sticker on it, it sounds like its a early type map sensor.

Scoobylover2829

sorry its crappy qualty because its from my phone, here is the pic here
http://www.facebook.com/home.php#!/p...8&id=550663713

Splitpin

I'm too cool to join Farcebook. Any links we can see without having to log in somewhere?

Scoobylover2829

damm sorry lol i thought you would off been able to see it without having to join :L here ya go http://img37.imageshack.us/i/3850945...713550663.jpg/ yeah mate it does have a silver/foil sticker on the back

Scoobylover2829

is there anyway i could test it with a multimeter or something?

my94wrx

iTrader: (4)

that's the early 92/96 map sensor, as stated earlier in the thread you need to tell us the year of your car so we can give accurate information, without these minor details we cant really help you.

Scoobylover2829

hmm the car i got it off was from a scrappy so didnt really look lol , i think it was from a M reg not 100% though, thanks lee

my94wrx

iTrader: (4)

i don't think you can grasp the question,WHAT YEAR IS YOUR CAR! the one that you want to fit the sensor too???

Scoobylover2829

im using the map sensor from the subaru to fit on my project car which is not a subaru, all i need to know is what wires are the 5v imput earth and sensor output thank you

my94wrx

iTrader: (4)

ok lets start again, what year of suabru is the engine out of? if you dont know the anser what ecu are you running, if its standard tell me the large numbers off of the top of the ecu case, the reason i am asking is if you fit the wrong MAP sensor to wrong ecu and try to run any boost it will **** your engine up.

Scoobylover2829

sorry lol i didnt make it clear enough, im using it on a ford fiesta, which i have converted to turbo, im using a fiesta rs turbo ecu to run it all but i dont have a map sensor to sense boost, thats why im using a map sensor from the subaru, thats why i only need to know which wire is 5v imput earth and sensor output, hope this helps

my94wrx

iTrader: (4)

right this does help although the map sensor you have is not the best one and will only allow you to run at approx 1.2 bar, this is the wiring to the map sensor that you have at the moment,

MY92-96 MAP sensor Wiring
=========================

Red = +12V
White = Sensor
Green = Gnd


hope this helps.

Scoobylover2829

ahh just what i was looking for thanks mate posted on loads off scooby forums but no one could help lol

my94wrx

iTrader: (4)

no worries.