HELP Please
26 June 2010, 06:27 PM
#1
Scooby Regular
Thread Starter
Join Date: Jan 2010
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
HELP Please
just had to change my spigot bearing in the flywheel refitted all inc gearbox clutch etc but now when i turn on the ignition the radiator fans come straight on and the fuel pump just keeps pumping instead of just pressurising the system so as soon as i try to start it the car floods anyone got any ideas its a 96 wrx import any suggestions would be appreciated as its driving me mad ive just started a new job and am having to use the wifes clio 
27 June 2010, 12:15 PM
#4
Scooby Regular
iTrader: (1)
Join Date: Dec 2009
Location: Ayrshire
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a diffrent problem. I cant see having g/ box out to change bearing having anything to do with fuel pump or fans. Th e fans come on with the ecu fault finding connectors under the dash are connected check these. there should be 2 green and 2 black make sure they are disconnected..
27 June 2010, 09:10 PM
#5
Scooby Regular
Thread Starter
Join Date: Jan 2010
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a diffrent problem. I cant see having g/ box out to change bearing having anything to do with fuel pump or fans. Th e fans come on with the ecu fault finding connectors under the dash are connected check these. there should be 2 green and 2 black make sure they are disconnected..
can the flywheel be in the wrong position ??
