BUGEYE REMOVING REAR BUMPER??
21 June 2010, 11:42 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2005
Location: stoke on trent
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
BUGEYE REMOVING REAR BUMPER??
Just after some ponters before break anything lol done a search and found nothing....
any pointers? bolt and clip locations etc?
ta
any pointers? bolt and clip locations etc?
ta
22 June 2010, 12:39 AM
#2
Scooby Newbie
Join Date: Jan 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
If its the same as a blobeye there will be 1 nut in each wheel arch ( 10 mm IRC ) 1 bolt behind each light cluster. 2 maybe 3 on the rear panel inside the boot and around 6 of them plastic clips underneath.. i hope ive not missed any out but if i have you will soon find them
Last edited by Scooter_3D; 22 June 2010 at 12:42 AM.
22 June 2010, 08:58 AM
#3
Plus 3 large bolts each side on the "chassis rails", then it slides off, but be ready to support it while you detach the numberplate wiring.
TBH, mine comes off with the two bolts in the wheelarches and two or three clips under the back. The other clips are only if you want the bumper skin off the support bar.
TBH, mine comes off with the two bolts in the wheelarches and two or three clips under the back. The other clips are only if you want the bumper skin off the support bar.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM
