Apexi Power FC coldstart problem
#1
Scooby Regular
Thread Starter
iTrader: (9)
Join Date: Aug 2005
Posts: 790
Likes: 0
Received 0 Likes
on
0 Posts
Apexi Power FC coldstart problem
I changed the turbo (S206) and injectors (stock 440s modded by Perrin to 815cc) on my classic WRX MY00 and now I have got a coldstart problem.
The engine goes quite low on the revs (about 750rpm) on startup and seems to be too rich during this time.
Can someone help me out regarding the normal setting of the coldstart?
Does the Setting2 - Accelerate Injetor (ms) have something to do with startupprocess or only the Water Temp Correction in Setting2?
Please let me know, what your settings are, too!
Many thanks in advance!
The engine goes quite low on the revs (about 750rpm) on startup and seems to be too rich during this time.
Can someone help me out regarding the normal setting of the coldstart?
Does the Setting2 - Accelerate Injetor (ms) have something to do with startupprocess or only the Water Temp Correction in Setting2?
Please let me know, what your settings are, too!
Many thanks in advance!
Thread
Thread Starter
Forum
Replies
Last Post