Found this MAF on ebay is it the one i need to upgrade my standard MAF. I have A 1995 classic and are looking at running an apexi ecu with other mods i have been told i need an orange label maf off a Z32.. If so is this a plug and play job or do i have to buy a different plug and if so what is the wiring on the plug... Any help would be appreciated..
This is the MAF
http://cgi.ebay.co.uk/Air-flow-Mass-...#ht_6710wt_754

 

You need to buy one with the plug and then it needs to be spliced into your original loom and mapped accordingly. If your fitting an apexi ecu you can have it fitted and mapped at the same time. Give Simon (JGM) a ring, he will see you right, he might even have one

 

Get a Q45 MAF, around £50 delivered off eBay..

 

Z32 is 80mm OD so fits the MY93-96 inlet trunking as per OEM. The Q45 one is 90mm OD, I think, so causes unnecessary hassle/expense. They both flow similar.

If you search "Z32" you should trawl in a thread with the wiring instructions...