no spark
Thread Starter
Scooby Regular
Joined: May 2009
Posts: 39
Likes: 0
From: sleaford
no spark
hi guys
ive just finished putting another engine in my 94 wrx, got everything connected and ready to go, but to my disapointment it has no spark, i have double checked all connections and made sure all pipes are in the right place, it has a spark for one turn of the engine then just goes and doesnt spark at all until you stop and try again,
any ideas as im now lost and really want it back on the road
thanks
ive just finished putting another engine in my 94 wrx, got everything connected and ready to go, but to my disapointment it has no spark, i have double checked all connections and made sure all pipes are in the right place, it has a spark for one turn of the engine then just goes and doesnt spark at all until you stop and try again,
any ideas as im now lost and really want it back on the road
thanks
Scooby Regular
Joined: Sep 2010
Posts: 935
Likes: 0
From: under the bonnet
Id check the crank and cam sensor, and associated wiring incase you have caught it and damaged it. Also maybe check the igniter behind the BCS and all the earths.
Last edited by musso2010; Jan 16, 2011 at 09:14 PM.
Start with the obvious, crack sensor. Is it clean and secure??
Earths, have you got them 'all' on?? Connect a jump lead from the neg(-) on the battery straight to the block.
Just to rule them out if nothing else.
Earths, have you got them 'all' on?? Connect a jump lead from the neg(-) on the battery straight to the block.
Just to rule them out if nothing else.
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
Apr 26, 2022 11:15 PM